Create a One-of-a-Kind Bathroom Vanity

Photo by Zbysiu Rodak on Unsplash

Antiques can bring a unique feel and vibe to almost any decor. But what happens when your antique piece doesn’t exactly work in the room it was designed for? If that is the case, it may be time to upcycle it for use in a different room. Below you will find out how to turn your one-of-a-kind antique dresser into a unique vanity for your bathroom. Please note, if at any time you feel this project is a little more than DIY, contact a professional to help you through it.

1. Purchase the Sink

You will need to find a sink that can fit within the measurements of the top of your dresser. When measuring, always be sure to measure the actual with of the base of the cabinet or dresser, not the overhang. The sink will be deep enough to pass this point, and most overhangs will be at least an inch or more.

2. Trace & Cut the Sink Hole

After removing the top drawer from the dresser, trace the template that came with the sink onto the top of the dresser with a permanent marker to give you a guide for cutting. Next, use a jigsaw to follow the lines, and cut the piece of wood. Once done, check to make sure that your sink fits, and remove more if needed to accommodate.

3. Finish the Dresser

Once you know that the sink fits, remove it, and sand down the cut area until it is smooth. Then, finish the dresser using your favorite stain or paint. After the paint or stain has dried, add a protective clear coat as this area will be affected by water. 

4. Affix the Sink to the Dresser

After your dresser is completely dry, you will need to apply some clear caulking around the rim. Then place the sink on top and press down firmly. You should not need to add any caulking after placing, but make sure you can see the seal all around it. 

5. Cut the Back to Accommodate Plumbing & Connect Your Pipes

Determine where the plumbing pipes will need to be attached to the dresser, and cut a hole to allow them to pass through. Next, connect all of your plumbing, making sure to use plumbers tape when connecting to reduce the risk of leaks. 

6. Secure the Dresser to the Wall

You will want to make sure that your new vanity is tightly affixed to the wall by more than just the plumbing. Once flush against the wall, secure the dresser to the wall-in studs.

By following the few simple tips above, you can convert your favorite antique dresser or cabinet into a fully functional vanity. This can make a great option for those looking for more vanity drawers or storage in their bathroom. 

How to Prevent Bathroom Falls

Despite its beautiful innocent look, the bathroom is potentially one of the most dangerous places in a home. Each year, thousands of bathroom accidents occur as a result of slipping and falling – and in other cases, hot water burns. Using the toilet, getting out of the shower or tub could turn to a hazardous situation. As a result of this, listed here are some bathroom safety tips that can help prevent injuries in the bathroom:

Install non-slip Surfaces

The causes of falls in a bathroom most time is due to slippery surfaces. Installing a non-slip surface is an effective way to prevent slipping in a bathroom. It is a sound investment for your safety and that of your loved ones. Bathroom tiles are also dangerous, especially when wet. You can apply a non-slip decal to the tiles to increase their grip. Avoid scatter rugs because they make it easy for people to trip over or fall.

Improve Accessibility

Since it is easy to fall and sustain an injury in the bathroom, it is essential to make sure essential items are within reach. In the bath or shower, be sure to have your shampoo, soap, conditioner, toothbrush, towels and other bathing accessories where you can quickly get across to them.

Get Rid of Obstacles

Items placed in hard-to-reach areas like the side of the bathtub can cause slips and falls. Install a walk-in shower or tub to reduce unnecessary movement. Having an organizer or bathroom rack to hold all your accessories is also a good idea.

Reduce risk of Overexertion

Besides falls, overexertion is also one of the significant causes of bathroom injuries. Installing accessories like a secured bath seat and a raised seat for the toilet will prevent overexertion. 

Improve Visibility

A well-lit bathroom is a safe bathroom. Installing night lights in the bathroom and the walkway leading to it helps to reduce accidents. Lighting is especially useful at night when it is dark, and the risk of slips is higher.

Keep the bathroom dry

A wet bathroom is a severe hazard to avoid. Look out for leaks and other issues that can cause water to be on the floor. You should also ensure that your bathroom cover is also waterproof and positioned in a way that directs water away from the floor. Have a mop on the floor too to dry any water after showers.Bathroom injuries can be dangerous, but they are preventable. The tips listed above go a long way in making reducing the tendency of injuries.

Revamp Your Bathroom on a Budget

For home sellers, you won’t necessarily need a bold, beautiful bathroom to improve your chances of a quick sale. However, you should try to improve the quality of your bathroom as much as possible before you add your home to the real estate market.

In a highly competitive real estate market, homebuyers will look for any reason not to buy your home. On the other hand, home sellers who offer a residence with an exceptional bathroom can reduce the risk of alienating homebuyers. Furthermore, home sellers may be able to transform a subpar bathroom into an outstanding feature if they devote time and resources to make bathroom improvements.

You don’t need to spend a lot to make significant bathroom improvements, either. In fact, here are three simple, affordable bathroom improvements that every home seller needs to know about:

1. Painting the walls

If the paint on your bathroom walls is fading or peeling, it may be time for a new paint job. Fortunately, you usually can pick up low-cost paint supplies at any hardware store quickly and easily.

Although hiring professional painters also is an option, you may be able to paint your bathroom walls yourself to save money. Remember, your bathroom likely is smaller than other rooms in your house, which means a new paint job won’t necessarily require a significant time and resource investment.

2. Updating bathroom fixtures

The little details can make all the difference in the eyes of a homebuyer. And home sellers who update bathroom fixtures can boost their bathroom’s chances of making a great impression on homebuyers during a home showing.

Drawer pulls, towel racks and other bathroom fixtures often are simple to update in just minutes. In addition, these bathroom improvements require minimal time and money, ensuring you’ll be able to complete bathroom fixture improvement projects to enhance your bathroom’s appearance without delay.

3. Adding caulk and grout

Bathroom caulk and grout details may be overlooked by many home sellers, but those who want their homes to stand out in a competitive marketplace should consider adding straight, clean lines of caulk and grout.

Placing new lines of caulk and grout around a bathtub and sink can help these pieces sparkle. Ultimately, caulk and grout improvements are fast and effective too, making them valuable options for home sellers.

It is important to note that improving the quality of a home’s bathroom rarely, if ever, requires a full-blown overhaul. Instead, focus on making minor improvements over an extended period of time. And, of course, be sure to keep your bathroom looking pristine – that way, if a homebuyer wants to view your residence, your home’s bathroom will stand out for all the right reasons.

Bathroom improvements offer superb options for home sellers who want to transform a good residence into a must-buy. These improvements typically won’t require substantial time and resources, but they can serve as key difference-makers that will help set your home apart from others on the real estate market.

Take advantage of bathroom improvements, and you’ll be better equipped to improve the overall quality of your residence.

Ways to Update Your Bathroom

Want to update your bathroom with a huge remodeling project? With a few simple updates you can change your old outdated bathroom to something more eye appealing. And the best part is you can do it all yourself with little to no cost!

Replacing a toilet seat

This is so simple and takes no time at all. If your toilet works just fine, but your toilet seat is outdated or worn out, a quick swap can really improve things. Start by removing the old seat by using a deep well socket to unscrew the bolt. A little WD-40 can help to loosen things up if needed. Line up the new toilet seat and bolt into place. And you are done!

Replace your shower head

Having a great shower head can make taking a shower a whole new experience. Find one that fits what you have been dreaming of, whether it’s one that creates a waterfall effect, or one with a hand held shower head. Typically replacing your shower head is as easy as unscrewing the old one and screwing on the new one! And for added benefit, pick one that saves on water.

Update your hardware

Updating your towel holders, soap dishes and toilet paper holder can really add a whole new look to a bathroom. Outdated hardware can make your bathroom look like it’s from the 1970s so pick new hardware that is modern and fits the overall look of the bathroom. Replacing hooks and towel holders is an easy DIY project as long as you know how. Many of these don’t have exposed screws, but they do have a tiny screw underneath each side that needs to be removed in order to lift off the wall mount.

Get new towels

And this includes bath mats, shower curtains and window curtains. Updating all these things can change the color scheme all together. Just make sure if you aren’t going to repaint that you pick colors and patterns that compliment the existing wall color. Bathrooms look best in neutral colors, or lighter shades of blues, greens and yellows.